Archives for October2015


How To Fix Error 1068 On Windows 7

[ad_1]

Quite a commonly occurring error, the error 1068 is a fault that is linked to something called the “INTERNET CONNECTION SHARING WIZARD” on the Windows XP operating system. This error appears when one of the internet connection sharing wizard’s dependencies (one of the services it needs to run) fails to load properly. Windows XP error 1068 crops up when you are running a remote connectivity feature within your operating system. While this might seem like a big problem, it’s actually quite easy to fix if you follow the instructions given in this quick tutorial.

When this problem happens, the error1068 will appear as this message:

  • An error occurred while Internet Connection Sharing Wizard was being enabled. The dependency service or group failed to start.
  • 1068: Dependency service or group failed to start.

Either way, this error is due to a problem with the Internet Connection Sharing Wizard that appears when you try to run this application. In order to fix the problem, you can apply the steps that follow below:

How To Fix The 1068 Error On Your PC

It’s possible to start the Dependent Service manually, which should fix the problem. As mentioned above, the reason for this fault is that the Dependent Service won’t load for some reason. To start this program manually, follow these steps: Click on the Start Menu; then click Help and Support. From here, select the “Pick a Task” option from the menu, and then click on “Use Tools to view your computer information and diagnose problems”. A Tools menu will then appear, and from here you need to select “System Configuration Utility”. A pane on the right will then pop up, and from here you can choose to “Open System Configuration Utility”. Within this utility, look for a tab labeled “Services” and click on it. Inside here, all you need to do is check the following services and make sure that they are turned on by clicking on the check box next to it:

  • Application Layer Gateway Service
  • Network Connections
  • Network Location Awareness (NLA)
  • Plug and Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Remote Procedure Call (RPC)
  • Telephony

Once you have turned all of the above services on, you will need to reboot your PC and then start the Internet Connection Sharing Wizard again, as you normally do. Hopefully, everything will run normally and you won’t see the error 1068 appear anymore. However, if it still persists, you will need to move onto cleaning the Windows registry.

The registry is a common cause of the 1068 error on your PC. This is an enormous database, and is the section of Windows that stores all of your programs and applications’ files, options and settings. Windows will need to access this registry whenever you run a program, in order to retrieve the information it needs. Without the registry, your computer wouldn’t be able to run any processes at all. The problem with the registry is that, like everything else with computers, its design is far from perfect. Now and again certain files will sustain damage, causing Windows to no longer recognize them – The result of this is problems like the 1068 error. The best way to repair this registry is to use a special program, what’s known as a registry cleaner, which can be downloaded from computer software websites. Make sure you choose a good one.

[ad_2]

Source by Greg Kahn

Running Antispyware

[ad_1]

Getting Antispyware packages installed in your system is easy enough, but you must be alert to download its latest version including the most recent spyware detection signature files.

Your number one concern while installing antispyware removal tools should be to read the end user license agreement to know exactly what you are agreeing to download. That done let’s look at how to go about getting your antispyware and adware removal package to work.

Getting Started With Antispyware Software

There is nothing complicated about installing your antispyware programs. But what you need to remember is that the latest spyware detection signature files won’t download automatically until you tell them to. So ensure that it is updated and also choose the option of automatic updates if available.

If your antispyware removal tool offers real-time protection and blocking of spyware, use it. There is always the chance, though, that the spyware might get into your system before it is detected. Start with the default settings, explore, and experiment with them. Make it a habit to run full scans on a regular basis. Schedule your antispyware software to remove Trojans say, once a week or every time you startup your system.

The next step is to make sense of your scan results. Antispyware software removal tools recognize spyware and their locations in processes in your system, tracking cookies, registry entries and shortcuts on your desktop or start menu. When there are running processes, it could imply active spyware in your memory. If you see registry entries and files, it is likely that spyware may have been lodged in your hard drive. Go through the details and analyze them. Tracking cookies can be harmless, but if tied to an IP, they can turn into spies that track your browsing habits, invading your privacy.

Taking Action On The Results

Some spyware or adware may be an integral part of some programs, games or utilities, which may not function if you remove the spyware and adware. If it is okay with you to keep this spyware and adware, and you feel that they are not threatening, retain them. Once the relevant spyware is removed run the scan again. In spite of all the precaution, you might still find traces of the spyware. Or you might find that it has reinstalled itself back into you computer. So reboot your machine and scan again. If you still find antispyware products, run the scan again with an alternate antispyware removal tool.

Regarding the alerts that come up during the real time protection, look for alerts that announce the presence of spyware, understand the implications and get rid of it.

[ad_2]

Source by A Singh

Troubleshooting the Blue Screen of Death Errors – 3 Easy Steps

[ad_1]

The Blue Screen of Death error, otherwise known as BSOD is a common occurrence for computer owners. The screen freezes and you only see a blue screen with white lettering telling you it is beginning a physical memory dump.

What is The BSOD?

The BSOD or Blue Screen of Death is an error that appears on Windows based PC’s. The older systems such as Windows 95, Windows 98, Windows NT, and Windows 2000 were more common for the problem, but the error is still being found in Windows XP and newer systems.

3 Easy Steps to Prevent the Blue Screen of Death are listed below:

The most common cause of the Blue Screen of Death is the Windows registry becoming corrupt or bloated. There are precautions you can take to avoid this from happening, or when it does a simple solution to fixing it.

1: Download software from sites you know are trustworthy: Downloaded games, applications, and other software can be embedded with malware programs such as adware, spyware, viruses, or other malicious software. The files Trojans, viruses and other malicious content is embedded into your Windows registry and can normally not be removed manually.

2: Download Your Hardware Drivers From The manufacturers Site: Avoid downloading drivers from unknown locations, incompatible drivers can cause havoc on your system. You are also at risk of downloading malicious software as well. Download the drivers from the manufacturer when at all possible.

3: Download a Registry Cleaner: Most of the Blue Screen of Death errors are brought on by registry errors. Download, install, and run a good registry cleaner for your version of Windows.

[ad_2]

Source by Sherman Choo

Antivirus System 2011 Removal Guide – How to Get Rid Of Antivirus System 2011 From Your PC

[ad_1]

Antivirus System 2011 is a newly released fake antivirus rogue, which has been created by hackers to try and get you to purchase the false upgrade to the software. It’s been created by hackers, and is part of a global scam to make as much money from false applications as possible. We’ve found that the Antivirus System 2011 infection will infect almost any PC that’s connected to the Internet, and needs to be removed in the most complete and effective way possible in order to ensure the smooth operation of your system. This tutorial is going to show you how to remove this virus from your computer for good.

What Is Antivirus System 2011?

This is a newly released program which is otherwise known as a “malware” (malicious software) virus. It works by installing itself automatically (and without permission) onto a Windows computer, and then proceeds to show you false scanning results in an attempt to trick you. This virus, along with the similar infections, will infect your PC from such Internet sources as a fake antivirus scan, malicious website and false email attachment – and are generally unable to be protected against with antivirus tools.

How To Remove Antivirus System 2011

Removing Antivirus System is done by first stopping this program from running, and then removing all the parts of it from your PC. The way to do this is to either delete the files manually, or use an automated tool to delete them for you. Although many technically minded people will attempt to manually remove the program, the fact is that in order to completely get rid of it, you have to be able to get rid of all the backup files it will be using to run. This can only really be done by using a specific piece of software.

This virus will install its files here:

  • %Documents and Settings%All UsersApplication DataAntiVirus System 2011

The best way to remove this virus is to download and run a “malware removal tool”. This is a leading piece of software that’s been designed by professional developers to get rid of the infection on your PC. You can use this tool by downloading a program called “Frontline Rogue Remover” and letting it get rid of the Antivirus System 2011 files from your PC for good. This will show you how to first stop the virus from running, before removing it completely from Windows, and is the most effective way to stop the virus you have on your system.

[ad_2]

Source by Greg Toddles James

What Makes a Good Registry Cleaner?

[ad_1]

Looking for a good registry cleaner? Before you can find one, you need to learn first what this registry utility tool is for. Understanding its functions and knowing the computer problems it is supposed to solve can help you select a good brand with the right features.

A good registry cleaner should have the ability to solve Windows registry-related problems. To help you better understand; let’s go back to the basic.

Registry-related computer problems

A computer running on XP, Vista and other Windows operating systems will have the Windows registry as part of its structure. A registry with too many unnecessary files stored in it can cause problems to a computer’s operation. Some of the more common problems that might be caused by registry overload are slow operation, freezing and system crashing.

Potential causes of registry problems

Damage to the registry can be caused by several factors. One of these is a computer virus. Computer viruses can cause all sorts of problems, including damage to the database. The same thing is true with malware. These two can damage existing files in the registry and even create files that are not compatible with the computer’s software.

Another cause of registry-related problems are incomplete installation and removal of both hardware and software programs. Even when some of these files are removed, the registry files created when they were installed remain in the system causing it to get clogged with redundant files or files that are not in use anymore. These excess files cause the system to slowdown, freeze and even crash.

Choosing a good cleaner

One way of solving Windows database-related problems is to use a registry cleaner to clean up the unnecessary files that have accumulated in your computer. A good cleaner should be able to identify unwanted files and clean them up or repair them. If these files cannot be repaired, then they should be removed by the registry tool.

Good cleaners not just identify the most number of errors but should also have the ability to tell which of these unwanted files actually affect the performance of a computer. Registry tools should also have backup features and should be simple enough to install and run so that even the non-techies can easily use it.

Registry cleaner tools are effective if they can make a computer run faster and prevent system crashes and computer freezing. At the same time, it should be safe to use and should not cause malware problems like some brands that are poorly made. Fast registry tool programs are also preferable over those that take a long time to clean up the registry.

A good registry cleaner should be able to do what it was designed for. The effectiveness of a cleaner can be seen in the performance of your computer right after the clean up was done.

[ad_2]

Source by Trevor Mulholland

Blue Screen Errors – How to Fix Them

[ad_1]

Do you get frustrated each and every time your computer suddenly turns into a blue screen with all kinds of numbers and letters on it? I feel your pain. Almost everyone who uses a computer has experienced such thing for once in their lives. If you are wondering if your computer is broken, then let me break it to you – no, it is not. It is, however, experiencing blue screen errors. This error, more notoriously known as the “blue screen of death” is an error displayed by a lot of operating systems, most notably the Windows system, once it encounters a critical error. This is a way of preventing more system damage. The usual error message is the one that asks if you have recently installed any kind of software or hardware and asking you to reset your computer. Ctrl + Alt + Del usually works wonders for computer users, but it will not work for the blue screen of death. You probably will end up restarting your computer. This may be a problem for some users who have unsaved data prior to the occurrence of the error.

Installation of software and hardware can sometimes be a cause of blue screen errors over time. Once you installed a program too many on your computer, the whole system may start functioning as slow as a turtle. Some programs that are not really needed are taking too much space in the CPU resources. When this happens, even the simple task of loading the Microsoft Office or opening a window will take forever. The shutting down of the computer will also be a problem.

What are the possible ways of fixing these errors? The most basic way of fixing the blue screen of death is by simply rebooting your computer. You may also shut down the computer and turn it on again after a while. If a reboot works, then you are one lucky person. You may start saving your files on a back-up disk in case the error occurs once again. However, if you belong to the unlucky people who are not able to fix the problem with a simple reboot, there is something more serious within your system.

One of the most effective methods of fixing the blue screen of death is through utilization of a registry cleaner program. A registry is a central database where files of all kinds are being stored. Since people are now very fond of downloading several materials from the Internet and from other resources, they tend to forget the risks involved. Some unwanted programs and files are consuming too much registry space. The registry cleaner will generally clean up the registry, removing all the unimportant programs or files and keeping the ones needed by the computer. Fix the errors if there are any.

If the error still persists after registry cleaner use, go look into your computer’s RAM. There are 2 sticks of RAM in the computer. Remove one and see if the computer runs. When you eliminate one of the sticks and the error subsides, it means that the stick of RAM is dysfunctional. What you have to do is buy a new stick. If you, however, tried all of the above mentioned methods and still fail to get rid of the blue screen error, the only thing left to do is to go to a computer shop or have a technician reformat your PC.

Before you go have your PC reformatted and lose all of your necessary files, you better try other ways of fixing the error. Make reformatting your last resort. The Internet is a good source of different methods of fixing blue screen errors. Find one that you can apply on your own to avoid expenses. Finally, once your computer is fixed, prevent the error from occurring again. Avoid downloading unnecessary files to lessen the possibilities of another occurrence of the “blue screen of death

[ad_2]

Source by Jacob Turner

An Honest Review of AntiSpyware 2008

[ad_1]

When we tested AntiSpyware 2008, we found it was one of the best spyware removers on the market. This anti spyware product did a very good job of locating threats from your computer, and protecting your system from further attacks. AntiSpyware 2008 also does a good job on blocking most of all the threats that are floating out there on the web today.

This software program has the four major components just about all spyware removers have. AntiSpyware 2008 offers scan, settings, quarantined list, and ignore list. With AntiSpyware 2008, you also get some special features such as a Browser Helper Object Manager (this is also known as BHO). This feature will start up each time you click on your internet browser. It will show you any new spyware intruders that are threatening your system. You also get access to a system startup manager that will shut down programs that are simply not needed. And you can also tap into the “set and forget” aspect. AntiSpyware 2008 has a feature that allows you to schedule scans ahead of time on a regular basis. But if you do want to monitor this yourself, you can turn off this feature and run it manually.

My only complaint about AntiSpyware 2008 is that it is a bit complicated, especially for the average user who does not know a lot about how to fix computers. But on the flip side, AntiSpyware 2008 does give fantastic customer service on their website. You get real time communication at all hours of the day.

[ad_2]

Source by Jeff Farley

Boost Your Computer’s Speed Now!

[ad_1]

Are you fed up of your computer’s slow speed? Well! The case is not just with you. There are thousands more looking out for solutions to boost up their PC’s rate of performance. You buy a new computer and soon it does not come up with the same efficiency. Sometimes, you just expect too much perhaps. But all too often, the computer is really slow. But why?

Over time, all data and files keep on accumulating on your hard disk thereby making a mess there. Thanks to computer support Australia companies which are capable enough to reverse these irksome problems and bring your machine back to life! Here, you can help your computer run with the fast speed. Your support technicians greatly increase your PC speed by performing steps like cleaning up and defragmenting disks and the Registry, removing bloated software, and applying performance tweak.

However, results may vary on different computers and factors like your computer usage and maintenance. But you will certainly find computer optimization services worth your money! When you optimize your compute, you save approximately 10 to 30 minutes a day which you used to spend combating with nasty computer problems. Also, your improved PC will prevent you from having technicians look at it every other day thereby saving you lot of dollars.

Availing PC Support Australia optimization services from computer support companies is an ideal solution for every computer user who wants to boost his/her PC for peak performance without costly hardware upgrades.

With a plethora of computer support resources available online, you can call or book your PC optimization service round the clock, and have expert technicians at your service in no time. The support available at these resources is not limited to just one or two computer repair Australia services but they have got the complete array to offer. Those who have tried these online tech services have found these resources extremely beneficial for lost data recovery, computer troubleshooting, virus removal, spyware removal, antivirus installation or configuration, internet optimization etc. They boast to offer professional, friendly advice and services to get your computer up and resolve your computer issues.

[ad_2]

Source by Aadya Johnson

How to Stop the Blue Screen Error on Windows 7 – A Trick That Not Many People Know Can Solve It

[ad_1]

The Blue screen error – also known as the ‘blue screen of death’ – is a problem that has affected Windows computers for a very long time. However, many people are surprised to see its presence in Windows 7. If you are experiencing blue screen errors on your Windows 7 PC then there’s actually a way to fix them which only computer technicians used to know.

The way to fix the blue screen of death error is to fix the problems that cause it. The blue screen is basically a way for your system to tell you that something is so wrong that it has no choice but to restart. Many people refer to the error as a “fatal” error, because it “kills” your current computer session and forces your PC to restart into another one.

The blue screen of death can be caused by many different problems, but with Windows 7, we’re actually very lucky in the fact that most instances of this type of error are caused by the ‘registry’. The registry is the central database for Windows, which stores information about your computer and is where your PC is constantly referring to for settings, options and details about your system.

The registry is basically like the memory of Windows… but if any part of it becomes damaged or unreadable, it’s often the case that your PC cannot recover and ends up calling an error. The problem is that since the registry is constantly being used by your computer, it’s also getting confused about which files it has open – which leads it to save many of them in the wrong way. This causes the files to become damaged and corrupted, which is what causes your computer to be unable to read the files it needs, making it slower and causing all sorts of errors.

The blue screen of death is caused when there are either too many corrupt registry files or your PC requires a registry file to run, and it’s unable to read it. The reason why these errors seem so random is because your PC does not read the same registry files all the time – meaning that whenever you use your computer, it’s only by chance that it will open the files that cause the error, making it seem random. To fix this problem, it’s advised that you fix all the damaged registry files that are in your PC; and to do that you should use a ‘registry cleaner’.

Registry cleaners are software programs designed to clean out all the damaged registry files from your PC. They are indirectly very good at fixing the BSOD error because they fix all the problems that cause the issue in the first place. You can download one of these registry tools from the Internet and then let it remove all the errors from inside the registry. This should speed up your PC and stop the blue screen error on Windows 7.

[ad_2]

Source by James Henry Johnson

Windows Vista Repair

[ad_1]

Now that just about everyone knows how to use the XP Recovery Console Microsoft’s newest OS does not contain one. Not to worry we have a detailed article that will walk you through how to use these great new features in Vista.

The Purpose of this article is to teach you how to make vista repairs if you are having startup issues or you can’t seem to use the vista system restore option. There are two ways to use these options and they depend on if you have a Windows Vista install disk or if Vista was pre-installed on your OS you will have a ghost image on your hard drive.

If you have the windows vista repair disk: (This should be your backup copy of Vista if you made one)

PLEASE NOTE: This Vista install CD can be run from within Vista. Just insert the CD once Vista has loaded up and go to install, go > Install Now > Upgrade.

1. Boot up with the Vista install disc

2. You should see a screen that says “Windows is loading files”

3. After a few minutes you will get a language option. Select your language and hit next.

4. On the install screen select “Repair your computer”

5. Windows will find your copy of Vista on the machine

6. Select your copy of Vista and click next

7. You will now see the following options.

* Startup repair – This automatically fixes problems that are preventing Windows from starting

* System Restore – This will Restore Windows to an earlier point in time

* Windows Complete PC Restore – This will completely restore your entire PC – programs, system settings and files – from a back up that you have previously created (Available in Windows Vista Business, Enterprise and Ultimate editions only)

* Windows Memory Diagnostic Tool – This checks your computer’s memory hardware for errors

* Command Prompt

8. Assuming you are using this option because you were unable to boot to Windows Vista select the system Restore option and then select the date you would like to go back to. If your OS is fine you can always use the startup repair option.

Pre-Installed and OEM versions: (please check with your manufacturer fist. They may have replaced these tools with their own.

1. Turn your computer on and start pressing the F8 key. If you see the Windows Vista Logo you have gone too far and need to reboot and try again

2. You will get an advanced options screen. Select the “Repair your computer option” and hit enter.

3. Select your language and hit next.

4. Enter your user name and password and then next.

5. The recovery options should now appear.

6. In most cases just using the system restore to set your computer back will solve your issue. If this is not the case try the Startup repair option.

[ad_2]

Source by Jacob Erdei